Musical Fidelity M1 SDAC Specifications download pdf (Page 14)

BLUETOOTH

Issue 4 Page 14 of 47

The M1 SDAC features a Bluetooth A2DP audio input (receiver circuit). T

his can be used to

receive Bluetooth transmissions from other Bluetooth Audio (A2DP) enabled devices such as

mobile phones, laptop computers or similar Bluetooth enabled sources. If the connecting device

supports aptX

®, the M1 SDAC will use it.

Bluetooth is a digital “radio” link and as such requires an external antenna to function. This antenna is supplied

with the M1 SDAC. Consult the reseller/dealer if the antenna is missing.

BLUETOOTH antenna

M1 SDAC is housed in a top quality metal enclosure and therefore requires an external antenna for Bluetooth

operation. Bluetooth is unlikely to work at all without the antenna attached!

The Bluetooth antenna should either be attached directly to the socket on the back of the unit. For better

positioning flexibility, the antenna may be attached to its magnetic base which, is then attached to the antenna

socket on the back of the unit.

When positioning the antenna, ensure it is away from potential sources of interference, and in full, plain view

from across the room.

When making connections, please ensure the nuts are tightened to “finger-tight” and as such be secure.

It is neither necessary nor recommended to use tools to tighten them any further!

BLUETOOTH device setup

To create a Bluetooth link it is necessary to “pair” and then “connect” the Bluetooth device(s) to the M1 SDAC.

This needs to be done every time a new device is introduced to the M1 SDAC.

The M1 SDAC stores information for up to 16 Bluetooth devices.

The M1 SDAC must be turned on; with blue POWER LED and display lit (it is not actually necessary to switch to

Bluetooth input at this point, but it is easier to see when a valid link is established). The display will show no link.

This means that the unit does not yet recognize any Bluetooth device in the vicinity.

BLUETOOTH

Please con

sult and follow the device (phone, etc) manual instructions for pairing.

You do not need to do anything on the M1 SDAC other than ensure it is ON.

If the DAC is not listed, try refreshing the list in the Bluetooth device, and check that the M1 SDAC is on (i.e. not

in standby). Also check antenna is fitted; positioned away from potential sources of interference, and in full,

plain view from across the room.

“Pair” (see device user manual for more details) with the “Musical Fidelity M1 SDAC” that should appear in the

device’s Bluetooth list.

N.B. If asked for a password, please enter “1234” on the phone. This password is not changeable.

“Connect” (see device user manual for more details) with the “Musical Fidelity M1 SDAC” that should appear in

the device’s Bluetooth list.

The device should then be “connected”. Successful connection is indicated by the word “Linked” as shown in

the example below.

1kH

192kH

BLUETOOTH

BLUE

TOOTH input

To use the BLUETOOTH input, press the BLUETOOTH input select button on the front panel, or remote

control.

The incoming sample rate will be displayed if a valid digital signal is present.

1kH

192kH

BLUETOOTH

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

Comments to this Manuals

No comments

Musical Fidelity M1 SDAC Specifications Page 14

Comments to this Manuals

Related products and manuals for Audio amplifiers Musical Fidelity M1 SDAC