Musical Fidelity M3si Specifications Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
M3si manual issue 1 Page 11 of 12
-20.0
-15.0
-10.0
-5.0
0.0
5.0
10.0
15.0
20.0
20.0 31.5 50.0 80.0 125 200 315 500 1000 1600 2500 4000 6300 10000 16000
RIA A
PHONO
RIA A /IEC
PHONO RESPONSE
Frequency (Hz)
dB
Output
Power 85 Watts per channel into 8 Ohms
Voltage 27 Volts RMS, 20Hz to 20 kHz; onset of clipping
76 Volts peak to peak
Current 25 Amps peak to peak
Damping factor 36
Output devices 1 pair per channel
Line input
THD+N < 0.014 % typical, 20Hz to 20 kHz
Signal / noise ratio > 98dB ‘A’-weighted
Input impedance 40 k Ohms
Frequency response + 0, –0.1dB, 10Hz to 20 kHz
Phono input
Sensitivity (nominal) 3mV (suitable for cartridges
giving 1.5mV or more including
high output MC types)
Signal / noise ratio > 70dB ‘A’-weighted
Input impedance 50k Ohms
Frequency response RIAA/IEC ±1dB, 20Hz to 20 kHz
USB input
USB Asynchronous, sample rate up to and inc. 24 bit, 96 kHz USB audio stream.
Connections
USB input Type “B” socket up to and inc. 24 bit 96kHz USB audio stream
Phono inputs 1 pair Phono MM inputs
Phono grounding post 4mm banana post to chassis earth
Line level inputs 4 pairs line level RCA connectors
Line level outputs 1 pair line level RCA connectors, constant level LINE outputs
1 pair line level RCA connectors, PREAMP outputs for e.g. biamping
Speaker outputs 2 pairs 4mm banana plug/binding posts
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption <0.5W in standby mode
320 Watts maximum
Weight
Unit only, unboxed 9.2 kg (20¼ lbs)
in shipping carton 13 kg (30 lbs)
Dimensions
Wide 440 mm (17”)
High, including feet 100 mm (4”)
Deep (front to back) including terminals 400 mm (15¾”)
Standard accessories
IEC type mains lead 10-Amp type
Remote control M3s series
Batteries LR03 or AAA, manganese alkaline type 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS
Page view 10
1 2 ... 6 7 8 9 10 11 12

Comments to this Manuals

No comments